| C001011 | high | Resistance between the output and the vehicle ground < 5 Ohm. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001012 | high | Voltage > 3 V | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001013 | high | Resistance at output > 1 kOhm. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C00101A | high | Resistance between the output and the PCV ground < 5 Ohm. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001095 | high | Short circuit between inlet and outlet valve | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001111 | high | Resistance between the output and the vehicle ground < 5 Ohm. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001112 | high | Voltage > 3 V | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001113 | high | Resistance at output > 1 kOhm. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C00111A | high | Resistance between the output and the PCV ground < 5 Ohm. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001163 | high | Valve is set exhaust > 1 min (when using I/O DID "PCV Valves", 0x1212). | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001195 | high | Short circuit between inlet and outlet valve | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001411 | high | Resistance between the output and the vehicle ground < 5 Ohm. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001412 | high | Voltage > 3 V | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001413 | high | Resistance at output > 1 kOhm. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C00141A | high | Resistance between the output and the PCV ground < 5 Ohm. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001495 | high | Short circuit between inlet and outlet valve | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001511 | high | Resistance between the output and the vehicle ground < 5 Ohm. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001512 | high | Voltage > 3 V | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001513 | high | Resistance at output > 1 kOhm. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C00151A | high | Resistance between the output and the PCV ground < 5 Ohm. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001563 | high | Valve is set exhaust > 1 min (when using I/O DID "PCV Valves", 0x1212). | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C001595 | high | Short circuit between inlet and outlet valve | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C005122 | high | Sensor signal is to high (level depends on parameter "Maximum steering angle", P1BL0) | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C005127 | high | Sensor signal changes too fast. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C005128 | high | Sensor signal offset > 90 degrees | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C005149 | high | Internal fault received from sensor via Sensor CAN | Volvo TRUCKxBS | can_communication | Открыть |
| C005154 | high | Control routine "Enable Fast Steering Angle Sensor Adjustment" (0x0406) has not yet been started. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C005155 | high | Sensor is detected, but not configured. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C005161 | high | Sensor not calibrated | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C005162 | high | Sensor signal is implausible compared to yaw rate sensor signal and reference yaw rate. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C005176 | high | Sign of the Sensor signal is incorrect. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C005193 | high | The failure is reported if after a vehicle standstill a left and a right curve has been detected, but the steering angle sensor signal has not changed. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C006122 | high | Sensor signal > 15 m/s^2 | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C006128 | high | Sensor signal offset > 2.5 m/s^2 | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C006154 | high | Sensor not calibrated | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C006164 | high | Sensor signal is implausible compared to other ESP sensor signals and the reference yaw rate. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C006322 | high | Sensor signal > range of the yaw-rate sensor. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C006327 | high | Sensor signal changed too fast. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C00632F | high | Noise, vibrations or implausible frequencies on the yaw rate sensor signal are detected by the central ECU. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C006349 | high | Internal fault received from sensor via Sensor CAN | Volvo TRUCKxBS | can_communication | Открыть |
| C00634A | high | The failure is detected if either iYRS is configured but not populated (according HW coding), or ext YRS is configured but ESP sensor CAN or ESP sensor supply is not populated. | Volvo TRUCKxBS | can_communication | Открыть |
| C006355 | high | Sensor is detected, but not configured. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C006364 | high | Sensor signal is implausible compared to steering angle sensor signal and/or reference yaw rate. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C006376 | high | Sign of the Sensor signal is incorrect. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C006392 | high | - Difference between measured and reference lateral acceleration is > 2 m/s^2. - Temporary error Flag is read from sensor CAN sent by yaw rate sensor | Volvo TRUCKxBS | can_communication | Открыть |
| C006396 | high | Offset of sensor signal is too high. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C100021 | high | Sensor signal voltage < 0.3V. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C100022 | high | Sensor signal voltage > 4.5V. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C100028 | high | Sensor signal offset is out of range <0.5 or >0.85V. | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
| C100112 | high | Voltage > 5 V | Volvo TRUCKxBS | abs_ebs_brakes | Открыть |
