| C001011 | high | -Fault will be detected by activation of test pulse and reading back hardware status information. Resistance between the output and the vehicle ground is less then 5 Ohm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001012 | high | Fault will be detected by activation of test pulse and reading back hardware status information. If the output is higher then 3 V for the duration of the detection time. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001013 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance at output pin is higher than 1 kOhm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001111 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance between the output and the vehicle ground is less then 5 Ohm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001112 | high | Fault will be detected by activation of test pulse and reading back hardware status information. If the output is higher then 3 V for the duration of the detection time. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001113 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance at output pin is higher than 1 kOhm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001411 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance between the output and the vehicle ground is less then 5 Ohm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001412 | high | Fault will be detected by activation of test pulse and reading back hardware status information. If the output is higher then 3 V for the duration of the detection time. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001413 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance at output pin is higher than 1 kOhm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001511 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance between the output and the vehicle ground is less then 5 Ohm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001512 | high | Fault will be detected by activation of test pulse and reading back hardware status information. If the output is higher then 3 V for the duration of the detection time. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001513 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance at output pin is higher than 1 kOhm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001811 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance between the output and the vehicle ground is less then 5 Ohm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001812 | high | Fault will be detected by activation of test pulse and reading back hardware status information. If the output is higher then 3 V for the duration of the detection time. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001813 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance at output pin is higher than 1 kOhm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001911 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance between the output and the vehicle ground is less then 5 Ohm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001912 | high | Fault will be detected by activation of test pulse and reading back hardware status information. If the output is higher then 3 V for the duration of the detection time. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001913 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance at output pin is higher than 1 kOhm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001C11 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance between the output and the vehicle ground is less then 5 Ohm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001C12 | high | Fault will be detected by activation of test pulse and reading back hardware status information. If the output is higher then 3 V for the duration of the detection time. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001C13 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance at output pin is higher than 1 kOhm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001D11 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance between the output and the vehicle ground is less then 5 Ohm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001D12 | high | Fault will be detected by activation of test pulse and reading back hardware status information. If the output is higher then 3 V for the duration of the detection time. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C001D13 | high | Fault will be detected by activation of test pulse and reading back hardware status information. Resistance at output pin is higher than 1 kOhm. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100001 | high | Hardware fault is detected by wheel speed input circuit of the ECU. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100025 | high | If the minimum measurable wheel- speed is above its limit value, then fault is set. (Limit speed is 10 [km/h]) | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100029 | high | ABS activation frequency on wheel is implausible | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C10002F | high | Plausibility test for the wheel speed sensor signal frequency (frequency jumps) | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100031 | high | If a not plausible drop of the wheel speed signal happens (or signal is frequently jumping between above 11[km/h] and zero), error is set. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100038 | high | The error is set if the current wheel speed differs (>25%) from the average of the other wheels for a long time. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100054 | high | The deviation between the learned wheel circumferences and the EOL programmed values are too large (deviation > 25%). | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100101 | high | Hardware fault is detected by wheel speed input circuit of the ECU. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100125 | high | If the minimum measurable wheel- speed is above its limit value, then fault is set. (Limit speed is 10 [km/h]) | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100129 | high | ABS activation frequency on wheel is implausible | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C10012F | high | Plausibility test for the wheel speed sensor signal frequency (frequency jumps) | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100131 | high | "If a not plausible drop of the wheel speed signal happens (or signal is frequently jumping between above 11[km/h] and zero), error is set. " | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100138 | high | The error is set if the current wheel speed differs (>25%) from the average of the other wheels for a long time. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100154 | high | The deviation between the learned wheel circumferences and the EOL programmed values are too large (deviation > 25%). | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100201 | high | Hardware fault is detected by wheel speed input circuit of the ECU. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100225 | high | If the minimum measurable wheel- speed is above its limit value, then fault is set. (Limit speed is 10 [km/h]) | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100229 | high | ABS activation frequency on wheel is implausible | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C10022F | high | Plausibility test for the wheel speed sensor signal frequency (frequency jumps) | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100231 | high | "If a not plausible drop of the wheel speed signal happens (or signal is frequently jumping between above 11[km/h] and zero), error is set. " | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100238 | high | The error is set if the current wheel speed differs (>25%) from the average of the other wheels for a long time. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100254 | high | The deviation between the learned wheel circumferences and the EOL programmed values are too large (deviation > 25%). | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100301 | high | Hardware fault is detected by wheel speed input circuit of the ECU. | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100325 | high | If the minimum measurable wheel- speed is above its limit value, then fault is set. (Limit speed is 10 [km/h]) | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100329 | high | ABS activation frequency on wheel is implausible | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C10032F | high | Plausibility test for the wheel speed sensor signal frequency (frequency jumps) | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
| C100331 | high | "If a not plausible drop of the wheel speed signal happens (or signal is frequently jumping between above 11[km/h] and zero), error is set. " | Volvo TRUCKABS | abs_ebs_brakes | Открыть |
